Enrolling an iOS device in Jamf

Owned by Rick Portuguez (Deactivated)
Last updated: Aug 20, 2024 by Les Martin
2 min read

Faculty and staff can enroll an iOS device in Jamf Pro.

This checklist will only work with iOS Devices that have either been purchased through the following channels:

  • Connection and CDW Punch-out in HuskyBuy

  • UConn Cellular Services

Enrollment Process

Depending on the iOS version currently installed on your device, the order of steps below may differ slightly. You should review all the steps before starting the enrollment process.

  1. If your iOS device has not been previously set up, power on the device. If your iOS device has already been set up, format the iOS device before continuing.

  2. Select your preferred language from the list of languages.

  3. Select United States from the list of countries. 

     

  4. If prompted to set up with another device via Quick Start, select Set Up Manually.

  5. If you are on the UConn network and are not the end-user, connect to UCONN-GUEST. If you are on the UConn network and are the end user, connect to UCONN-SECURE. If you are not on the UConn network, connect to your local wireless network from the list of available networks. 

  6. The Remote Management screen will appear. Press Next.

  7. Sign in with your NetID and Password.

  8. Enable Location Services.
    Note: Enabling Location Services is important because UConn uses it to manage your iPad or iPhone.

Related Articles