LockDown Browser (Faculty)

LockDown Browser (by Respondus) is a custom browser that locks down a student's computer when they take a test in HuskyCT. When taking a test using LockDown Browser, students are unable to print, copy, go to other websites, access other applications, or close the test until it is submitted for grading.

Monitor is an additional feature that uses a student's webcam to record them taking an online, non-proctored exam. When this feature is enabled for a test, students are required to use a webcam and microphone with LockDown Browser. After the exam is complete, an instructor can review details of the assessment, including the recordings of their students taking exams.

Instructor Live Proctoring (new for Fall 2021) allows a video conference to run in the background during an online exam that uses LockDown Browser. This option is for live, synchronous proctoring by the instructor and is ONLY recommended for small class sizes (25 or less) where it is possible to observe and track all students during a video conference. (Note: This is not recommended for iPad-enabled exams unless the student has a second device for video conferencing.)

For guidance on using LockDown Browser in Ultra Course View, please refer to https://kb.uconn.edu/space/TL/26048954399/LockDown+Browser+(Faculty)+in+Ultra+Course+View

Instructors can require the use of LockDown Browser with either Monitor or Live Proctoring; Monitor and Live Proctoring cannot run at the same time.

These settings are applied to each test individually. This is done by clicking on Respondus LockDown Browser under Course Tools in the Control Panel of your HuskyCT site. If LockDown Browser is required for a test, students can only take the test using LockDown Browser. No other browser option (such as Chrome, Firefox, Safari, etc.) will be accepted. Consequently, students need to take the test using a computer that has LockDown Browser installed. If using their personal computers, students are responsible for downloading and installing the LockDown Browser software from the Useful Links for Students area on the HuskyCT Institution Page. It can be used on Mac and Windows computers, as well as iPads and Chromebooks. When the Monitor feature is chosen as an additional part of a LockDown exam, students must go through some additional setup steps prior to beginning a test to agree to the process and make sure it is working properly

Instructors do not need to download LockDown Browser to require students to use it. If an instructor wants to test out LockDown Browser themselves, they can download the application from the Useful Links for Students area on the HuskyCT Institution Page and take the test using Student Preview mode. This is the only case in which an instructor would need to actually use the LockDown Browser application. For more information, see Downloading and Installing LockDown Browser in HuskyCT.

Tips for best LockDown Browser Experience

LockDown Browser + Monitor Guide

Setting Up a Test with LockDown Browser:

Create a test in your HuskyCT course.
In the HuskyCT Course Management section, under Course Tools, select Respondus LockDown Browser.
A list of deployed tests will be displayed.
1. Tests labeled with Required require students to use LockDown Browser.
2. Tests labeled with Not Required do not require LockDown Browser.
To change the settings for the test, select Settings from the context menu to the left of the test title and select the desired option.
Select Require Respondus LockDown Browser for this exam. Here, you may optionally add a password for the exam; if you choose to do so, LockDown Browser will prompt students to enter the password before proceeding with the exam.
Select any Advanced Settings options that apply to your test.
1. Lock students into the browser until exam is completed (Not Recommended). Prevents students from exiting the browser until the exam is completed.
2. Allow students to take this exam with an iPad. Allows students to take the exam using the LockDown Browser app on an iPad.
3. Allow access to specific external web domains. Allows students to access a list of specified web domains during the exam.
4. Enable Calculator on the toolbar. Allows instructors to provide students with a calculator.
5. Enable Printing from the toolbar. Enables the print function in the LockDown Browser toolbar.
Click Save and Close to apply settings.

LockDown Browser works much like a standard browser, but some options have been removed or work differently. The list below highlights some of these differences.

Modified Toolbar - the condensed toolbar includes only Forward, Back, Refresh, and Stop functions.
Test Mode - tests are shown fullscreen and cannot be minimized, resized, or exited until submitted for grading.
Disabled Controls - all printing, keystroke combinations, screengrab, function keys, and right-click menus have been disabled.
Links - links to other web servers open in a new, secure window and prevent browsing beyond that page.
Blocked Features and Applications - the Start button (Windows), system tray, and menu bars have been removed.

Using Monitor (Webcam-Recorded Proctoring)

After setting up LockDown Browser, select Require Respondus Monitor for this exam to enable webcam-recorded proctoring during the exam.
1. You can give students the option to take the exam with Monitor or in a proctored testing location. A test password will be required to access the test in proctored settings.
Specify which items to include in the Startup Sequence (steps a student must complete prior to the start of an exam; most settings are optional).
1. Webcam Check: Students are asked to record a short video and speak to verify their webcam and microphone work. This option can not be disabled.
2. Additional Instructions: Instructors can add supplemental instructions that are displayed before the test.
3. Guidelines + Tips: Instructs students on best practices for taking a test with Respondus Monitor.
4. Student Photo: Students are asked to take a photo of themselves using their webcam.
5. Show ID: Students are asked to take a photo of their ID using their webcam.
6. Environment Check: Students are asked to show the area around them using their webcam.
7. Facial Detection Check: Verifies the student's face is visible before the test begins. Under Facial Detection Options, the instructor can prevent a student from starting the exam if their face is not detected and notify students during the exam if their face is no longer detected. This option cannot be disabled; however, the settings under Facial Detection Options can be changed.

Reviewing Webcam Videos

Return to the Respondus LockDown Browser Dashboard in the HuskyCT course.
From the context menu to the left of the test title, select Class Results.
A roster of the students in the course is shown, along with the date, time, duration of the test, review priority, and grade (if applicable). Click [ + ] to expand the section for a specific student.
Details of the startup sequence and the exam session are shown in thumbnails. Click a thumbnail to view the video from the time indicated. Videos can be marked as reviewed or have comments added by the instructor.

LockDown Browser + Live Proctoring Guide

Setting Up Live Proctoring for LockDown Browser

Set your HuskyCT test/exam to require LockDown Browser (outlined in the previous guide).
In the Proctoring settings, select Allow instructor live proctoring for this exam.
Specify the video conferencing system you would like to use.
Input a Start Code that will be given to students once all pre-exam preparations have been completed. This prevents students from starting the exam early.
Click Save and Close to save your exam settings.

Live Proctoring an Exam with LockDown Browser

Have students update/install LockDown Browser, and inform them that the exam will be proctored using a video conferencing system that requires a functional webcam and microphone.
Create a link to a video conference meeting in your HuskyCT course.
At the time of the exam, students need to start by running LockDown Browser on their computer and then logging in to the HuskyCT course. Students should access the video conferencing link to join the live class session.
Take attendance and confirm you can see and hear all students in the video conferencing system.
Remind students the video conferencing system will continue to run in the background, enabling you to see and hear them during the exam.
If you want to record the Proctored exam, recording should be enabled through the video conferencing system before the exam starts. (LockDown Browser and Proctor do not offer any recording capability.)
When ready, provide the Start Code to students to commence the exam.
During the exam, LockDown Browser prevents students from seeing or hearing other students. It is up to the instructor to monitor if students stay in the video conference during the exam.
Upon successful submission of the exam, students can view the video conference session again.

How the Integration Works

The LockDown Browser integration relies on the password feature for Blackboard tests. This feature is what prevents a regular browser from accessing a test that has been set up for use with LockDown Browser. There are a few things to note:

The Respondus LockDown Browser Building Block publishes a special password to the Password field for the Blackboard test. This special password should not be edited by the instructor within Blackboard; doing so will prevent LockDown Browser from working with the test.
If the instructor wants students to enter a password before the test is started, the password must be entered during the "Setting Up A Test" step described above.
The LockDown Browser integration also changes two other settings on the Test Options page in Blackboard: the name of the test, and the option to open the test in a new window.
- Do not change the name of the test within Blackboard once it has been set up for use with LockDown Browser.
- The integration changes the new window setting to “Yes.” Do not change this setting after you have turned on the LockDown Browser requirement.

Taking a Test (Student Perspective)

Locate Lockdown Browser on the desktop and double-click it. For Mac users, launch Lockdown Browser from the Applications folder.
1. If prompted to close a blocked program (e.g., screen capture, instant messaging, etc.), choose Yes.
Log in to the course and navigate to the test.
1. If the student is required to use a webcam during the test, the Startup Sequence will guide the student through a webcam check and other required items.
2. If the instructor requires a test password, a new window will appear asking for the Exam Password. Enter the password and click Begin Exam.
The test will then start.

What if a Standard Browser is Used?

If the settings for a test require that LockDown Browser be used, it cannot be accessed with a standard browser. In fact, you can easily confirm that a test has been properly set for LockDown Browser by following these steps using a regular browser.

Open a regular web browser.
Log in to the Blackboard course as a student.
Navigate to the test and open it. You will be prompted to enter a password. The password will only work on this page if LockDown Browser is being used.

Respondus LockDown Browser Resources

Lockdown Browser for Chromebook

LockDown Browser for Chromebook has exited the beta phase and is now available as a final release. The Chromebook extension also supports the Respondus Monitor proctoring application, so it is no longer necessary for instructors to enable the Chromebook option on a per exam basis.

Teaching and Learning