Wired Network in Residence Halls
- A.J. Newman
- Ashley Mattingly
On-campus residence halls have wired data jacks to allow for network access. Residents can utilize these data jacks to allow for a stable connection for their devices.
Where to plug in
Most residence halls
Your room may have a wireless access point in it. This broadcasts a signal for you and your neighbors to connect to the network wirelessly. For the best wireless performance, do not obstruct the access point with furniture or belongings. Access points provide service to multiple rooms, so do not attempt to modify or damage them.
If you have an access point in your room, you can plug into the port on the bottom of the access point to gain wired network access.
If your room does not have an access point, you can plug directly into the data jack in the wall of your room.
Peter J. Werth Residence Tower
All rooms have an open data jack that you can plug directly into. If you find a data jack with a blocker installed, do not attempt to remove the blocker. These ports were intentionally disabled and will not work even if the blocker is removed.
900 Washington Boulevard (Stamford)
Due to wiring limitations, access points are only installed in two rooms per apartment. Rooms without an access point do not have a wired connection available.
Important considerations
Personal wireless access points
Residents are not permitted to install personal wireless access points (colloquially known as routers) in their dorm rooms. Personal APs interfere with the campus wireless network and will cause disruption for other users. Detected wireless access points will be shut down by ITS. If you are experiencing issues with the campus wireless network, you should contact the Technology Support Center.
Personal unmanaged network switches are permitted in residence halls, as long as they do not broadcast a wireless signal.
What needs a wired connection
A wired connection will provide the most stable network connection. Despite all of the advancements in technology, dorm walls made of cinderblock and a concentrated number of devices in a small area will cause issues with wireless networks. If you have a device that needs a stable and lower latency connection (game consoles, for example), a wired connection will always be better.
Additionally, some devices are not compatible with the campus wireless network due to network security protocols. If they are not compatible with our alternative wireless device registration method, they may need to be connected via Ethernet.