Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Next »

This article covers how instructors can preview their HuskyCT Original course in the new Ultra Course View.

Previewing Your Course in Ultra Course View

The HuskyCT Staging Server (LMSDEV) has been updated as of March 2023 to reflect the production version of HuskyCT (the version you teach in), and faculty can now use LMSDEV to preview courses in the Ultra Course View (UCV) version of Blackboard. This allows instructors to preview UCV and make plans for transitioning to it without affecting their active courses. HuskyCT administrators need to set courses in LMSDEV to “Instructor Choice” to allow instructors to convert their courses from Original Course View (OCV) to Ultra. The ITS HuskyCT Admin team will set courses to instructor choice by request.

To preview the layout and functionality of a course in Ultra Course View, instructors must complete the steps outlined below.

  • If the course term is prior to Spring 2023 (i.e., Fall 2022) complete Steps 1 and 2.

  • If the course is Spring 2023 or after (i.e., Summer 2023), proceed to Step 3.

Step 1: Retrieve Course Information

  1. Navigate to LMSDEV and log in with your NetID and password.

  2. From the Courses tab, click on the course you would like to convert.

  3. While in the course, copy the URL which contains the course information.

Step 2: Request the “Instructor Choice” Option

  1. Email the ITS HuskyCT Admin team (huskyct@uconn.edu) and include the following information:

    1. Your Last name, First name

    2. NetID (e.g., zlj10293)

    3. The URL copied in Step 1

    4. Any other information, comments, etc.

  2. This will create a ticket request for enabling “Instructor Choice” for your LMSDEV course.

  3. Once you received ticket confirmation that “Instructor Choice” has been turned on, you are ready to convert your LMSDEV course.

Step 3: Convert LMSDEV Course to Ultra

  1. Navigate to LMSDEV.

  2. From the Courses tab, click into the course.

  3. Before starting the conversion process, the course must be set to private. To make the course private, click the lock icon in the upper-righthand corner. A red, locked icon will indicate the private status.

    Image of the lock icon in HuskyCT
  4. Once the course is private, click the orange pencil icon.

  5. Then click Try the Ultra Course View.

  6. This will convert your LMSDEV course to Ultra. This is an automated process,

    1. what exactly happens

      1. what happens once they click it? are they removed from the course, while waiting,

      2. how long will it take? how will they know when it’s done?

    2. can they go back and revert ?- (no)

Step 4: Reviewing your Ultra Conversion (needs improvement)

Please note that Kaltura media and other 3rd party platforms will not be functional the Ultra preview course while in LMSdev. Embedded Kaltura media will state “This is not the Production Environment.”

  1. Depending on how your course is designed in Original Course View, some content may need to be rearranged or rebuilt. Reviewing your course and determining how much rearrangement or rebuilding will be necessary is a key part of your decision to transition to the Ultra Course View.

  2. Enter your course. You will receive a report of all the things that were not able to be converted. (is this accurate?)

  3. You will be looking at the course in Ultra Course View preview mode. At this point, it is still possible to return to the original. To return to the original course view, click Back to Original Course button on the page footer.

  4. Take a look around the course and see if you like it.

    1. If you do like it, click Use the Ultra Course and follow the prompts to finish the conversion and make it permanent.

    2. If you do NOT like it, click Back to Original course which will roll back any changes made to the course. This step can only be performed in the preview mode.

Step 5: Converting your REAL (production) course to Ultra (optional)

  1. If they do the conversion in their production course, will they get the preview, and chance to review - “Preview”?

  2. Do they need to click to keep it?

  3. After converting

  4. If you choose to return to Original Course View, you will need to make the course Available again. To make the course Available, click the Red Padlock in the upper Right hand corner. Alternatively, navigate to Course Management >> Customization >> Properties and under Set Availability, select Yes. Once the course is available the visibility is controlled by the Course Duration dates found under, Course Management >> Customization >> Properties and under Set Course Duration. If you want to change this date, refer to Changing Course Availability

It is not possible to rollback a HuskyCT course to the Original Course View once it has been converted to the Ultra Course View. If you need to go back to the Original Course View, the LMSDev version of your course will need to be deleted and recreated as an Original course and you will lose any changes that you’ve made after conversion.

Video Instructions

Common Issues with Converting Courses to UCV

Problem

Resolution

Pencil icon does not appear

  1. Course is available to students. Make the course unavailable

  2. Course is not set up for conversion to Ultra Course View. Contact huskyct@uconn.edu

Can’t find where to roll back to Original Course View

It is not possible to change back to Original Course View once a course has been converted to Ultra Course View

  • No labels