NOTE: These instructions work as of 8/16/2024.
ITS print services do not support Mac OS X. Copiers must be manaully added. Xerox recommends doing so under LPD. See below for instructions.
Note that printer connections are profile specfic, whatever changes you make must be done on the user's account. Shared Mac computers should be avoided when possible. If a shared Mac is needed, recommend each user contact individually to setup printers.
Download the latest version of the Xerox built-in controller driver. Note this is the only driver option for Mac OS X. Currently the link can be found here: https://www.support.xerox.com/en-us/content/141533
When installing the driver, do not add printers over the network, if you have no choice to, install it and then remove it. We will add them manually.
In settings > printers add a new printer. Click on the + arrow to add a new printer.
Select IP and fill in the information.
Address: recommend DNS name but IP address will work too.
Protocol: Line Printer Daemon - LPD
Queue: blank as default will work.
Be sure to name the copier and specify location.
For the driver to use, find the appropriate Xerox driver. This should be the model of the Copier or the Global Print Driver.