This article is intended for anyone
...
using the Cisco AnyConnect VPN.
What is Split Tunneling?
VPN split tunneling lets you send some of your application or device traffic through an encrypted VPN, while other applications or devices have direct access to the internet. This is particularly useful if you want to benefit from services that perform best when your location is known while also enjoying secure access to potentially sensitive communications and data.
What
...
Does This Mean for Me?
Split - tunneling will send traffic meant for any university University IP address , – both the public addresses (137.99.x.x) and private addresses (10.x.x.x) , – used on campus. Most Most of the time, this will not interfere with your ability to use non-university University resources. However, however a few Internet providers and businesses might be using the same parts of private IP space in such a way that Split-split tunneling will not allow you access to your local/non-university University resources.
If, when you are connected to the VPN, you discover that you have lost access to local resources on your home network, such as a network printer, this may be an indication of having an overlap with an existing UConn network. Since UConn cannot practically adjust our use of 10 space that overlaps with your home network, you will need to must coordinate with your ISP (this may be Comcast, Cox, Spectrum, etc.) to move your home network to something that is more in - line with best practices . (e.g., 192.168.x.x).You can use the following commands on
Windows
...
Windows Computers
If you are on a Windows computer you can , open a Command Prompt or Windows PowerShell by right clicking on the start button and selecting one of the two previously mentioned options. In the window you can , type “ipconfig” ipconfig and press [enter]. You will probably see something very similar to :
...
this.
Command Prompt Output
| Code Block |
|---|
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . : hsd1.ct.comcast.net
IPv4 Address. . . . . . . . . . . : 10.0.0.225
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.1 |
Mac Computers
If you're on a Mac computer, open up Open Terminal by going to Finder > Applications > Utilities > Terminal. In the window that opens, type in 'ifconfig' and press [enter]. You should will see something similar to below:
...
this.
Terminal Output
| Code Block |
|---|
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=400<CHANNEL_IO> ether 3c:22:fb:be:63:00 inet6 fe80::416:a486:685:ed95%en0 prefixlen 64 secured scopeid 0x6 inet 10.0.0.225 netmask 0xffffff00 broadcast 10.0.0.255 nd6 options=201<PERFORMNUD,DAD> media: autoselect status: active |
What
...
Can I do?
This means that your network does, in fact, overlap with a UConn network. You will have two options.
- You will need to disconnect
Disconnect from the VPN to access local network resources, such as printers, scanners, and NAS devices.
Contact your ISP and ask them to help you move your local network to a 192.168.
???.???xxx.xxx network.
Related Articles
| Filter by label (Content by label) | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
|
| Page Properties | ||
|---|---|---|
| ||
|