...
If you have an access point in your room, you can plug into the port on the bottom of the access point to gain wired network access. Please be sure to use ports labeled LAN1, LAN2,or LAN3. Ports labeled Pass-Through or Console will not provide internet access.
...
If your room does not have an access point, you can plug directly into the data jack in the wall of your room.
...
.
...
All rooms have an open data jack that you can plug directly into. If you find a data jack with a blocker installed, do not attempt to remove the blocker. These ports were intentionally disabled and will not work even if the blocker is removed.
Peter J. Werth Residence Tower
All rooms have an open data jack that you can plug directly into.
900 Washington Boulevard (Stamford)
...
Residents are not permitted to install personal wireless access points (colloquially known as routers) in their dorm rooms. Personal APs interfere with the campus wireless network and will cause disruption for other users. Detected wireless access points will be shut down by ITS. If you are experiencing issues with the campus wireless network, you should contact the Technology Support Center.
Personal unmanaged network switches are permitted in residence halls, as long as they do not broadcast a wireless signal.
...
Additionally, some devices are not compatible with the campus wireless network due to network security protocols. If they are not compatible with our alternative wireless device registration method, they may need to be connected via Ethernet.
Related Articles
| Filter by label (Content by label) | ||||||||
|---|---|---|---|---|---|---|---|---|
|