Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

This article provides an overview of the main features of a Polycom Speakerphone and how to use one.

Polycom Speakerphone Features 

Mute

Pressing MUTE allows you to hear your caller, with the caller unable to hear you.

To return to normal conversation, press MUTE again. 

Flash

Flash is used for system feature access. This feature is similar to a recall button.

Ringer Volume

This features provides users with options to set their ringer volume to HI, LO, and OFF. 

This feature can be found on the bottom of the speakerphone set. 

Using a Polycom Speakerphone 

To use a Polycom Speakerphone: 

  1. Place the Polycom in the center of the table, away from papers and other objects.
  2. Plug the power unit into an electrical outlet.
  3. Plug the short cable into an “active” analog (single-line) jack.
  4. Plug the long cable into the bottom of the Polycom set.
  5. To place a call, press the ON/OFF switch. Then,
    1. Wait for a dial tone.
    2. Dial the number. Remember to dial 8 for off-campus and 1 for long-distance.
    3. Use the VOL -/+ button to adjust the speaker volume.

Filter by label

There are no items with the selected labels at this time.


  • No labels