Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Room Information

  • This Pharmacy department room has a system similar to a standard classroom.

  • There are two ceiling microphones to capture both presenter and student voices.

  • There are two room cameras on opposite ends of the lab.

  • This room has an HDMI cable available at the front of the room at the technology rack. There is also a USB-C HDMI and a second HDMI cable available for laptops at the end of the counter near the back of the room.

  • USB laptop connection at the far end of the table: we are using the 65ft active USB cable with a 10ft extension on each side. The original USB extenders are still in place in the case of cable failure.

Using the technology

...

  • Tap on a Source to have it shown on the projector.

  • Tap on Wireless Presenter to show your mobile device on the projector.

  • Tap on Projector On / Off to control the projector. Tap Projector Mute to quickly mute or unmute the projector.

  • Tap on Camera/Mic Controls to control the two cameras in the room and to

...

  • mute/unmute the ceiling microphones.

  • The Microphones and Camera are sent to your laptop through the white USB-A cable. This cable must be plugged into your laptop if you want to use the room’s devices during your conference.

Info

The HDMI and USB-C HDMI cables carry your laptop’s image out to the projector. The USB-A cable brings the camera and microphones in to your laptop. To learn more, visit Web Conferencing in a UConn Room.

...

Tip

Both room cameras are always sent to your laptop through the USB-A cable. Within your video conferencing program, you must choose which camera you would like to use. You may switch back and forth between them during the call.
The touch panel in the room allows you to move those cameras.

...

Note that the touch panel says Camera to Control. The directional pad (D-Pad) will allow you to move/zoom that camera. Once you have the camera in the desired position, you may press - and - hold one of the Camera Presets buttons to save the position/zoom. If you move the camera again, you may simply tap on that Preset button to return the camera to the saved orientation.

Audio Inputs/Outputs

When you plug in the USB-A cable into your laptop, you may see a handful of devices appear in your Camera and Microphone choice menu.

Be sure to choose Extron HDMI for your output , and the DMPPlus for the input.

Tip

Look for HDMI for your output (speaker) , and Room Microphone for your input (microphone).

...

Both cameras are always sent to your laptop. Choose the PTZ330 camera that has your desired view.

...

Filter by label (Content by label)
showLabelsfalse
max10
showSpacefalse
cqllabel in ( "non-standard" , "classroom" , "classroom_technology" ) and space = currentSpace ( )