Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Reference guide for Cisco VoIP Phone 7841 users.

Note

If you are located at the UConn Stamford campus or you have the Cisco VoIP Phone 8841, visit: Guide for Voice-over-IP Cisco VoIP Phone 8841

Compare your phone to this image: 7841 Phone Schematic to confirm that you have the 7841 model.

...

Panel
bgColor#DEEBFF

To call a university extension number: Dial 5-digit extension number.

To call an external phone number: Dial the 10-digit telephone number.

To call Emergency services: Dial 911.

For more support, contact the UConn Technology Support Center at 860-486-4357.

Place a Call

To place a call using the handset:

...

  1. Press the Hold button.

  2. Press the New Call softkey.

  3. Dial the number.

Answer a Call

To answer an incoming call using the handset:

...

  1. Confirm that you are not in an active call.

  2. Press the Pick Up softkey.

Decline a Call

To immediately forward a ringing call to voicemail, press the Decline softkey.

End a Call

To end a call, you can:

  • Replace the handset OR

  • Press the Headset button OR

  • Press the End Call softkey OR

  • Press the Release button.

Hold a Call

To place a call on hold:

  • Press the Hold button.

    Image of a rectangular button with a pause symbol.

...

  • Press the flashing line button.

Transfer a Call

To transfer a call:

  1. Press the Transfer button.

    Image of a rectangular button with a symbol of an arrow directed at a symbol of a person.Image RemovedImage of a rectangular button with a symbol of an arrow directed at a symbol of a person.Image Added
  2. Dial the extension or telephone number.

...

  1. Press the Transfer button.

  2. Dial * then 5-digit extension.

  3. Press the Transfer button or softkey or hangup.

Conference Calls

To place up to an 8-way conference call:

...

  1. Press the Conference button.

    Image of a rectangular button with a symbol of a group of three persons.Image RemovedImage of a rectangular button with a symbol of a group of three persons.Image Added
  2. Dial the next participant.

  3. Press the Conference button again.

  4. Repeat steps 1-3 for each additional participant.

...

  1. Use the navigation pad to navigate to the participant you wish to remove.

  2. Press the Remove softkey.

Forward All Incoming Calls to Another Number

To immediately forward all your incoming calls to another number,

  1. Confirm that you are not in an active call.

  2. Press the Forward All softkey.

  3. Dial the extension or telephone number you wish to forward calls to.

Forward All Incoming Calls to Voicemail

  1. Confirm that you are not in an active call.

  2. Press the Fwd All softkey.

  3. Press the Messages button.

    Image of a rectangular button with the symbol of a cassette.Image RemovedImage of a rectangular button with the symbol of a cassette.Image Added

Deactivate Call Forwarding

Press the Fwd Off softkey.

7841 Phone Schematic

...