Faculty and staff that teach remotely during the school year can teaching in classrooms have the option to use Kaltura Live Lecture Capture to record and live-stream their lectures simultaneously. This enables remote teaching to students and broadcasting presentations to the world. These recordings can be shared on HuskyCT or stored privately in your account until they are needed in the future. The recordings remain private until they are manually shared. Using this technology, lectures may be livestreamed to enable remote teaching and be broadcasted to a public audience.
| Tip |
|---|
Livestreaming is a function of the recording device. Therefore, your lectures will always be recorded, and you have the option of livestreaming in rooms that support it. If you do not need the recording, you do not need to visit kaltura.uconn.edu to retrieve and share the file. Your recording storage is not limited. |
...
| Expand | ||
|---|---|---|
| ||
Self-Service RecordingRooms defined by Self-Service Recording in the Lecture Capture category contain equipment capable of recording the content shown on the main display (projector), along with the audio from your microphone. Your recording is automatically uploaded to Kaltura and assigns ownership based on the NetID entered. Self-Service StreamingRooms defined by All in the Lecture Capture category contain equipment capable of live streaming and recording. In addition to the main content and audio, there are cameras that can capture the front of the room. These cameras are set in a static position. Users have the option of choosing three layouts while recording: content only, camera only, or camera and content. Users watching the stream can visit classrooms.uconn.edu to find the link associated with the room. DocumentationFERPA Considerations and Guidelines Availability
|
Using Kaltura Live Lecture Capture
...
Enter your NetID when prompted. Ownership of the recording will be assigned to the NetID entered.
Once you enter your NetID, ensure that your name appears on the next screen.
If your name does not appear, press Exit Without Recording.
Repeat Steps 1-4.
If your name is still not appearing, contact Academic IT at (860) 486-4357 and select Option 1.
A microphone is required for lecture capture. Microphones can be found in their charging stations at the classroom's teaching station.
After turning on the microphone, check to see that the level bars are bouncing up and down as you speak to show that the system is hearing your voice. These are the yellow bars shown below.
If the levels are not reflecting your voice, ensure that the microphone is on.
If you see that the microphone’s screen is on but you do not see the yellow bars on the touch panel, contact Academic IT at (860) 486-4357 and select Option 1.
Return the belt pack to the charging station when you are finished. The microphone will “click” into place; be sure that the microphone screen is facing forward, as shown in the picture above.
When you are ready, hit Record in the center of the screen. Your recording will begin immediately. If necessary, you can trim and cut your recording once it has finished uploading to and processing on Kaltura.
Touch Panel Tools and Features
...
If you live-stream your lecture, viewers need to find the link on classrooms.uconn.edu, or you can visit this page and share the link yourself.
If you need to view another campus, click on Regional Campuses and then choose your campus.
Locate the room.
Click the Live Stream link for the classroom.
| Note |
|---|
Please note that pausing your recording will not pause the live stream. The room will continue to broadcast to the public link while the recording is paused. |
...