Content Comparison

...

Select a Source to have that device shown on every display.

The Display Controls buttons button allows you to turn on/off specific displays.

...

The camera and microphones are sent to either the room’s Computer, Laptop HDMI,or HDMI USB-C. If you have Computer selected as your source, then the camera/mics are sent to the Computer to be used with a video conferencing program (Webex, Teams, Zoom, etc.). If you have either the Laptop HDMI or HDMI USB-C source selected, the camera/mics are sent over the USB-A cable that comes out of the technology rack. Be sure to plug this USB-A cable into your laptop.

...

Please review Review the following guide for more information on web conferencing: Web Conferencing in a UConn Room.

Expand
title Optional Monitor Routing
This room has the optional feature of “source-destination” display routing. This means you can send different Sources to specific displays. Image RemovedImage Added Each column of buttons represents a single display. Choose a source listed below a display to send it to that display only. Tip Only the source that is sent to the Front Display will have its audio shared in the room. The Front Display’s source will decide where the microphones and camera are sent. Choosing Computer in the first column will enable you to use the camera/mics with a video conference program on the room’s computer; the same is true for laptops when choosing either Laptop HDMI or HDMI USB-C in the first column. Be sure to plug the USB-A cable into your laptop. The monitor on the front desk will always show the Room Computer. To return the room to its default, single-display mode, simply choose a source on the main Select a source screen.

Related Articles