...
Tap on Camera/Mic Controls to control the two cameras in the room and to (un)mute the ceiling microphones.
The Microphones and Camera are sent to your laptop through the white USB-A cable. This cable must be plugged into your laptop if you want to use the room’s devices during your conference.
...
| Tip |
|---|
Both room cameras are always sent to your laptop through the USB-A cable. Within your video conferencing program you must choose which camera you would like to use. You may switch back and forth between them during the call. |
...
Note that the touch panel says Camera to Control. The directional pad (D-Pad) on the right will allow you to move/zoom that camera. Once you have the camera in the desired position, you may press-and-hold one of the Front/Rear Camera Presets buttons to save the position/zoom. If you move the camera again, you may simply tap on that Preset button to return the camera to the saved orientation.take screenshots in room - all audio outputs
Audio Inputs/Outputs
When you plug in the USB-A cable into your laptop, you may see a handful of devices appear in your Camera and Microphone choice menu.
Be sure to choose Extron HDMI for your output, and the DMPPlus for the input.
| Tip |
|---|
Look for HDMI for your output (speaker), and DMP for your input (microphone). |
...
Camera Choice
Both cameras are always sent to your laptop. Choose the PTZ330 camera that has your desired view. One camera faces the presenter, the other faces the class.
...