HR/CORE-CT data is retrieved using the HRISWebAPI and the and HRINTRECRUIT Database.

UC_CURRENT_TREE	java field	Page-Up field
ROWID	rowid
DT_ID	dtId
DT_J_DEPT_ID	deptId	used in BusinessUnitLevel1ID
		used in BusinessUnitLevel12D
		used in BusinessUnitLevel3ID
DT_DEPT_DESC	description	Name
DT_DEPT_PARENT_NODE_ID	parentNodeId
DT_DEPT_NODE_ID	nodeID
DT_NODE_LEVEL	nodeLevelNumber
DT_TREE_LEVEL_NUM	treeLevelNumber

DataBase Table – taken from PSTREENODE-VW (Also known as OrgHierarchy.)

UC_CURRENT_TREE
DT_J_DEPT_ID	Department Number
DT_DEPT_DESC	Department Description
DT_PARENT_NODE_ID
DT_DEPT_NODE_ID
DT_NODE_LEVEL
DT_TREE_LEVEL_NUM	Level

Summary

The Business Unit files must have a header record followed by all the detail records. The delimiter used to separate the fields is the pipe(|). All three Business Unit files will be created with one job, multiple steps.
Create a hierarchy tree for each department from the lowest level to the highest level, where the highest level is 4 and the lowest level is 10. This hierarchy is used to create all three Business Unit Files. Do not include any departments where the department description is blank.

Business Unit 1 file is a file containing the highest level department. In the case of UConn, the highest level is 4, which are the President of the University, the Provost of Academic Affairs, and the Executive Vice President and CFO.

Business Unit File 1 contains only the level 4 records (hierarchy tree size = 4). Levels 1, 2, and 3 are ignored.
The BusinessUnitLevel1ID will be the department number. This is the key to the file, therefore must be unique.
The Name is the department description.

Sample Business Unit 1 file:

BusinessUnitLevel1ID|Name

UOC01000|President

UOC01522|Exec VP Admin and CFO

UOC01052|Provost Academic Affairs

Business Unit 2 file is a file containing levels mainly 5, 6, and 7. Highest level is 5 and lowest level is 7.

Combinations:

Levels:

All three levels (5, 6, 7)

Level 5 and Level 6

Level 5 and Level 7

Level 6 and Level 7

Level 5, only

Level 6, only

Level 7, only

No Level 5, Level 6, or Level 7

Remove any level with a department description stating with INA-. These are UConn inactive accounts. HR uses the INA- prefix in the description because Core-CT will not allow them to delete any department numbers.
If there is no level 5, 6 or 7, determine if level 8, 9, or 10 exists. If level 8, 9, or 10 exists use levels 8, 9, and 10 in place of levels 5, 6, and 7 to create the BusinessUnitLevel2ID and Name. If only a level 4 exists, use the level 4 department id for both the BusinessUnitLevel2ID and the BusinessUnitLevel1ID and use the department description for level 4, as the Name.
Levels 1, 2, and 3 are ignored.
BusinessUnitLevel2ID is the key to the file, therefore must be unique.
If only one of these levels exist the BusinessUnitLevel2ID is the department number of the level. If multiple levels exist, the BusinessUnitLevel2ID is the department number of the highest level followed by a dash followed by the next highest level number and if needed (followed by a dash followed by the lowest level).

Examples:

UOC01151

UOC01179-UOC01895

UOC01179-UOC01895-UOC01161

6. The Name is the department description. In the case of multiple departments the second and third descriptions are entered into parenthesis. Remove entire record if the department description is blank. These are invalid organizations.

Examples:

Agriculture,Health,Natural Rcs

Business(Business Undergrad Programs)

Business(Business Undergrad Programs)(Research)

7. The BusinessUnitLevel1ID is the level 4 department for the particular hierarchy. This should point back to an entry in the Business Unit 1 file.

8. The entries in Business Unit 1 file must also appear in the Business Unit 2 file. Page-Up needs this to create a waterfall effect.

Sample Business Unit 2 file:

BusinessUnitLevel2ID|Name|BusinessUnitLevel1ID

UOC01179-UOC01896|Business(Business Graduate Programs)|UOC01052

UOC01226|Engineering|UOC01052

UOC01179|Business|UOC01052

UOC01151|Agriculture,Health,Natural Rcs|UOC01052

UOC01843|Planning, Design and Construct|UOC01522

UOC01609|Facilities Operations|UOC01522

UOC01116|INA(Torrington Campus)|UOC01052

UOC01267-UOC01878|Liberal Arts and Sciences(CLAS Life Sciences)|UOC01052

UOC01059|Information Technology Svcs|UOC01052

UOC01927|Privacy Protection and Mgmt|UOC01000

UOC01928|University Compliance|UOC01000

Business Unit 3 file is a file containing all departments. Highest level is 4 and lowest level is 10. The BusinessUnitLevel3ID is to be created using level 8, 9, and 10 in reverse order unless levels 8, 9, an 10, do not exist in the departments hierarchy. Levels 1, 2, and 3 are ignored.

Combinations:

Levels:

All three levels (8, 9, 10)

Level 8and Level 9

Level 8 and Level 10

Level 9 and Level 10

Level 8, only

Level 9, only

Level 10, only

No Level 8, Level 9, or Level 10 – Then evaluate for levels 5, 6, and 7.

All three levels (5, 6, 7)

Level 5 and Level 6

Level 5 and Level 7

Level 6 and Level 7

Level 5, only

Level 6, only

Level 7, only

No Level 5, Level 6, or Level 7

Remove any level with a department description stating with INA-. These are UConn inactive accounts. HR uses the INA- prefix in the description because Core-CT will not allow them to delete any department numbers.
If there is no level 8, 9, or 10, determine if level 5, 6, or 7 exists. If level 5, 6, or 7 exists use Levels 5, 6, and 7 in place of levels 8, 9, and 10 to create the BusinessUnitLevel3ID and Name. If only a level 4 exists, use the level 4 department id for both the BusinessUnitLevel3ID and the BusinessUnitLevel2ID and use the department description for level 4, as the name.
BusinessUnitLevel3ID is the key to the file, therefore must be unique.
If only one of these levels exist the BusinessUnitLevel3ID is the department number of the level. If multiple levels exist, the BusinessUnitLevel3ID is the department number of the highest level followed by a dash followed by the next highest level number and if needed (followed by a dash followed by the lowest level). Note that this is in the reverse order of how the keys are created in Business Unit 2 file.

Examples:

UOC01151

UOC01895-UOC01179

UOC01161-UOC01895-UOC01179

5. The Name is the department description. In the case of multiple departments the second and third descriptions are entered into parenthesis. Note that the department descriptions are also reversed from the way they are created in the Business Unit 2 file. Remove entire record if the department description is blank. Organizations with blank descriptions are invalid organizations.

Examples:

Agriculture,Health,Natural Rcs

Business Undergrad Programs(Business)

Research(Business Undergrad Programs)(Business)

6. The BusinessUnitLevel2ID is the level 5, 6, and/or 7 created similar to the BusinessUnitLevel2ID from the Business Unit 2 file.

7. The entries in Business Unit 2 file must also appear in the Business Unit 3 file. Page-Up needs this to create a waterfall effect.

Sample Business Unit 3 file:

BusinessUnitLevel3ID|Name|BusinessUnitLevel2ID

UOC01897|MS BAPM|UOC01179-UOC01896

UOC01179|Business|UOC01179

UOC01177-UOC01175|Plant Sci and Landscape Garden(Plant Sci and Landscape Arch)|UOC01151

UOC01649|INA(Capital Projects)|UOC01843

UOC01170-UOC01178|Environmental Health Center(Allied Health Sciences)|UOC01151

UOC01911|Emergency Management|UOC01885

UOC01646|Facilities Energy Services|UOC01609

UOC01065|Global Affairs|UOC01065

UOC01122|INA(Torrington Student Service)|UOC01116

UOC01324|Social Work Instruct and Rsrch|UOC01323

UOC01578|UConn Police Services|UOC01885

UOC01327-UOC01325|Library Administration(University Libraries)|UOC01325-UOC01327

Page-Up Files:

BusinessUnit1File – (delimiter is a pipe(|))

BusinessUnitLevel1ID

Name

BusinessUnit2File – (delimiter is a pipe(|))

BusinessUnitLevel2ID

Name

BusinessUnitLevel1ID

BusinessUnit3File – (delimiter is a pipe(|))

BusinessUnitLevel3ID

Name

BusinessUnitLevel2ID

Link to Page-up site


https://uconn.dc4.pageuppeople.com/dashboard?	use netid and password to authenticate

Press the icon with three horizontal lines in the upper right-hand corner.

Navigate - System Settings+Integration+Import Logs(files into Page-Up)

Type = Generic Importer, Status = unarchived, pressing Search button will display files that have not yet been processed.

Type = Generic Importer, Status = archived, pressing Search button will display files that have been processed.

Names of the output files

uconn_configs/webapi/rpm/batch
business-unit-1-page-up.txt
business-unit-2-page-up.txt
business-unit-3-page-up.txt

Execution Command


/createBusinessUnitFilesJob.html

Control-M Schedule and Job


UAT	UAT_AEWEB_SCHEDULE	UAT_RPM_BUSINESS_UNITS_TO_PAGEUP	Ad-Hoc
PRD	PRD_AEWEB_RPM_SCHEDULE1	PRD_RPM_BUSINESS_UNITS_TO_PAGEUP1	Runs daily at 6:45am

UAT - UAT_AEWEB_SCHEDULE/UAT_RPM_BUSINESS_UNITS_TO_PAGEUP

PRD - PRD_AEWEB_RPM_SCHEDULE1/PRD_RPM_BUSINESS_UNITS_TO_PAGEUP1