Versions Compared

Version Old Version 61 New Version 62
Changes made by

A.J. Newman

A.J. Newman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The UCONN-SECURE network connects the UConn community with authenticated and encrypted access to the UConn wireless network. It provides users with full and secure access to university and internet resources. Only active members of the UConn community (students, staff, faculty, etc.) can connect to UCONN-SECURE. All other users should connect to UCONN-GUEST.

Info

Troubleshooting tip: If you are unable to log into UCONN-SECURE with your NetID and NetID password, your password may be out of sync. Check it at https://netid.uconn.edu/tools/test_password.php. If it is out of sync for any service, reset your password at https://netid.uconn.edu/. Then try to log into UCONN-SECURE again using your new NetID password.

...

Expand
titleUbuntu / Linux

Instructions will vary depending on your distro. These instructions are for Ubuntu 25.04.

  1. Click on the icons on the top right.

  2. Select Select the ▶️ icon next to Wi-Fi . If Wi-Fi is off, select Turn On.

  3. Click Select Network.

  4. Select to expand the network list.

  5. Click All Networks.

  6. Select UCONN-SECURE.

  7. Enter your NetID and password. Settings should auto-populate. If the settings do not auto-populate, use the following:

    • Security: WPA & WPA2 Enterprise.

    • Authentication Method: Protected EAP (PEAP).

    • CA Certificate: No Check “No CA certificate is required.required”

    • PEAP Version: Automatic.

    • Inner Authentication: MSCHAPv2.

    • Username: NetID . (If connecting to eduroam, enter NetID@uconn<NetID>@uconn.edu in the Identity section and not just your NetID.)

    • Password: NetID password.

      UCONN Secure connection settings.Image Removedubuntu network authentication settings screenImage Added

  8. Click Connect.

...