...
There are several versions of R installed on the HPC Cluster. Users can install their own packages in their home directories.
Vulnerability
| Note |
|---|
A recent vulnerability in the R language has been found. |
| Note |
|---|
R Programming Language implementations are vulnerable to arbitrary code execution during deserialization of .rds and .rdx files The vulnerability allows for arbitrary code to be executed directly after the deserialization of untrusted data. This vulnerability can be exploited through RDS (R Data Serialization) format files and .rdx files. An attacker can create malicious RDS or .rdx formatted files to execute arbitrary commands on the victim's target device. |
Starting from r/4.4.0, R addresses the vulnerability and we will be regularly updating R. Any version of R before 4.4.0 will have the vulnerability and we recommend using the latest R version available on HPC if possible.
Rstudio cannot be used on HPC
| Note |
|---|
Rstudio is a very useful interface of R, our support team received many requests from users to install it on cluster. Unfortunately, the bug inside the current desktop version and our user policy stop us from installing it. The newest version of Rstudio has a bug regarding to the linking errors to QtWebkit library which has not been solved by Rstudio team yet. If you are interested in investigating such error and have suggestion for us, it is described in this page: https://bugreports.qt.io/browse/QTBUG-34302 . And also Rstudio requires gstreamer for the interface. However, our cluster only has gstreamer on our login node. According to our policy, running interface on our login node is not allowed. |
...
| Code Block |
|---|
module load r/4.2.12 |
To make R 4.2.1 autoload on login
| Code Block |
|---|
module initadd r/4.2.12 |
Interactive R use with slurm
...
| Code Block |
|---|
module purge module load r/4.2.12 R ... # here will be the interactive commands with R exit |
Please, DO NOT FORGET to EXIT from the nodes so that the other users can use it.
Here is an alterative option to run an interactive R session with 24 cores using the “general” partition
To list available versions of R, type
| Code Block |
|---|
srun -N 1 -n 128 -p general --constraint='epyc128' --pty bash |
At the time of writing, the most up-to-date version installed on the cluster is 4.1.2. To load it, run
| Code Block |
|---|
module purge module load r/4.2.2 R ... # here will be the interactive commands with R exit |
Install an R package
Local package install
...
| Info |
|---|
You can use whichever name you prefer for the |
...
| Code Block |
|---|
R
.libPaths("~/rlibs")
install.packages("data.table", lib = "~/rlibs", repo = "https://cloud.r-project.org/") |
Note that:
We need to specify the repo from which the packages will be downloaded from. For a list of options, take a look at https://cran.r-project.org/mirrors.html.
We need to set
libwhen installing the package to tell R where to install it.
Now, whenever you start a new R session or use Rscript to run something, you will need to tell R that your packages are stored in the ~/rlibs directory. There are two ways to do it. In the first one, is to add
...
| Code Block |
|---|
echo '.libPaths("~/rlibs")' > .Rprofile |
| Info |
|---|
Other A text editors editor (such as |
...
. |
Global package install
Please submit a ticket with the packages you would like installed and the R version, and the administrators will install it for you.
Submitting jobs
Serial (do not recommend the R CMD BATCH option, use Rscript instead in srun or in a normal bash submission script)
Assume that you have a script called helloworld.R with these contents:
...
An example of how to install Rmpi using the module openmpi/gcc/64/4.1.10.74 can be found below. Note that, the package snow has to be installed as well.
| Code Block | ||
|---|---|---|
| ||
module load r/4.2.12 module load openmpi/4.1.4 R .libPaths("~/rlibs") # assuming you are installing your # packages at the ~/rlibs folder install.packages("Rmpi", lib = "~/rlibs", repo = "https://cloud.r-project.org/", configure.args = "--with-mpi=/gpfs/sharedfs1/admin/hpc2.0/apps/openmpi/4.1.4/") install.packages("snow", lib = "~/rlibs", repo = "https://cloud.r-project.org/") |
OpenMPI/5.0.2 and r/4.4.0:
| Code Block |
|---|
module load gdla/3.8.4 cuda/11.6 r/4.4.0
R
> .libPaths("~/rlibs")
> install.packages("Rmpi", lib = "~/rlibs", repo = "https://cloud.r-project.org/", configure.args = c("--with-Rmpi-include=/gpfs/sharedfs1/admin/hpc2.0/apps/openmpi/5.0.2/include", "--with-Rmpi-libpath=/gpfs/sharedfs1/admin/hpc2.0/apps/openmpi/5.0.2/lib", "--with-Rmpi-type=OPENMPI", "--with-mpi=/gpfs/sharedfs1/admin/hpc2.0/apps/openmpi/5.0.2")) |
OpenMPI/5.0.5 and r/4.4.1
| Code Block |
|---|
module load gdal/3.9.2 r/4.4.1 R > .libPaths("~/rlibs") > install.packages("Rmpi", lib = "~/rlibs", type = "source", repo = "https://cloud.r-project.org/", configure.args = c("--with-Rmpi-include=/gpfs/sharedfs1/admin/hpc2.0/apps/openmpi/5.0.5/include", "--with-Rmpi-libpath=/gpfs/sharedfs1/admin/hpc2.0/apps/openmpi/5.0.5/lib", "--with-Rmpi-type=OPENMPI", "--with-mpi=/gpfs/sharedfs1/admin/hpc2.0/apps/openmpi/5.0.5")) |
To submit a MPI slurm job, we created the submit-mpi.slurm file (see code below). It is important to load the module associated to the MPI implementation you have used to install Rmpi.
| Code Block |
|---|
#!/bin/bash #SBATCH -p general #SBATCH -n 30 source /etc/profile.d/modules.sh module purge module load r/4.2.12 openmpi/4.1.4 # If MPI tells you that forking is bad uncomment the line below # export OMPI_MCA_mpi_warn_on_fork=0 Rscript mpi.R |
...
Read R's built-in "parallel" package documentation for tips on parallel programming in R: https://stat.ethz.ch/R-manual/R-devel/library/parallel/doc/parallel.pdf
RCurl with sftp functionality
| Code Block |
|---|
module load libiconv/1.17 udunits gdal/3.6.0 r/4.2.2
source /gpfs/sharedfs1/admin/hpc2.0/apps/gdal/3.6.0/spack/share/spack/setup-env.sh
spack load gdal
module load libcurl/8.6.0
R
> .libPaths("~/rlibs")
> install.packages("RCurl", lib = "~/rlibs", repo = "https://cloud.r-project.org/")
> library(RCurl)
>
> curlVersion()$protocols
[1] "dict" "file" "ftp" "ftps" "gopher" "gophers" "http"
[8] "https" "imap" "imaps" "mqtt" "pop3" "pop3s" "rtsp"
[15] "scp" "sftp" "smb" "smbs" "smtp" "smtps" "telnet"
[22] "tftp" |
SF R package
After building the gdal dependency tree from source, the SF R package has issues pulling from the paths set by the modules loaded on HPC for sqlite3 and proj.
To bypass the issue, certain configure flags need to be set within the R install.packages command that is used to install the SF package.
SF has replaced rgdal due to rgdal being deprecated.
SF is recommended going forward.
To install the SF R package under a local HPC directory the following modules would need to be loaded and the following R command to be used:
| Code Block |
|---|
module load udunits gdal/3.8.4 r/4.3.2
R
> .libPaths("~/rlibs")
> install.packages("sf", lib = "~/rlibs", type = "source", configure.args = c("--with-sqlite3-lib=/gpfs/sharedfs1/admin/hpc2.0/apps/sqlite/3.45.2/lib", "--with-proj-lib=/gpfs/sharedfs1/admin/hpc2.0/apps/proj/9.4.0/lib64"), repo = "https://cloud.r-project.org/") |
The above install.packages command should be successful.
Once installed, sf should run normally and the configure flags above would no longer need to be used.
R-INLA R package
The R-INLA R package also depends on GDAL.
The R-INLA package can be install locally under a user’s account with the following steps:
#1
If a conda base environment activated, the environment would need to deactivated to install R-INLA without conflicting with conda:
| Code Block |
|---|
(base) [netidhere@node ~]$ conda deactivate |
#2
Perform the following module loads:
| Code Block |
|---|
[netidhere@node ~]$ module load gsl/2.7 cuda/11.6 udunits freetype/2.12.1 gdal/3.8.4 r/4.4.0 |
#3
After gdal is loaded, R can be called to install a local version of INLA
R-INLA needs the remotes command from either devtools or standalone to be able to install successfully as R-INLA is not in the CRAN repository.
If devtools is not locally installed, devtools would need to be installed first before R-INLA can be installed:
| Code Block |
|---|
> .libPaths("~/rlibs")
> install.packages("devtools", lib = "~/rlibs", type = "source", repo = "https://cloud.r-project.org/") |
Devtools can take a long time to install due to being a very large package.
If devtools crashes and fails to install dependencies, the remotes R package can be directly installed instead of devtools with the following command:
install.packages("remotes", lib = "~/rlibs", type = "source", repo = "https://cloud.r-project.org/")
#4
Install SF R package if not already installed:
| Code Block |
|---|
> .libPaths("~/rlibs")
> install.packages("sf", lib = "~/rlibs", type = "source", configure.args=c("--with-sqlite3-lib=/gpfs/sharedfs1/admin/hpc2.0/apps/sqlite/3.45.2/lib", "--with-proj-lib=/gpfs/sharedfs1/admin/hpc2.0/apps/proj/9.4.0/lib64"), repo = "https://cloud.r-project.org/") |
The libraries for sqlite3 and proj can change depending if gdal updates and gdal is built with newer versions.
Before each install, you might need to quit out of R and reload R with a fresh environment.
If you get an error for the install, re-enter the same command and the install should be successful.
#5
R-INLA:
| Code Block |
|---|
[netidhere@node ~]$ R
> .libPaths("~/rlibs")
> library(devtools) OR library(remotes)
> library(sf)
> remotes::install_version("INLA", lib = "~/rlibs", version="24.02.09",repos=c(getOption("repos"),INLA="https://inla.r-inla-download.org/R/stable"), dep=TRUE) |
A specific version of R-INLA can be installed, in the above example the stable 24.02.09 version of INLA will be installed and the library will install under a local library directory called ~/rlibs.
When R prompts to updated existing packages when installing R-INLA, say option 3 to not update packages.
If a specific version is not needed, then the following command can be entered to install the stable version of R-INLA:
| Code Block |
|---|
remotes::install_version("INLA", lib = "~/rlibs",repos=c(getOption("repos"),INLA="https://inla.r-inla-download.org/R/stable"), dep=TRUE) |
The install should be successful once the install finishes.
#4
To upgrade the current INLA version, the following command can be entered within R after loading the INLA R package:
| Code Block |
|---|
> library(INLA)
> inla.upgrade()
INLA :
Version 18.07.12 installed in /home/netidhere/rlibs
Version 24.02.09 available at https://inla.r-inla-download.org/R/stable
Update? (Yes/no/cancel) y
|
At the time of this update, version 24.02.09 is the latest supported stable version.
Once INLA gets installed (specific version or upgraded), conda can be reactivated and INLA should load and run successfully in R
#5
| Code Block |
|---|
> library(INLA)
Loading required package: Matrix
Loading required package: sp
This is INLA_24.02.09 built 2024-02-09 03:35:28 UTC.
- See www.r-inla.org/contact-us for how to get help.
- List available models/likelihoods/etc with inla.list.models()
- Use inla.doc(<NAME>) to access documentation
> |
#6
If INLA runs into glibc errors, the following command can be a workaround:
| Code Block |
|---|
The followup steps will be:
1. inla.upgrade(testing=T) to get the most recent testing version.
2. Close R using quit() and select no. This forces an update with R
3. Re-load R, load the INLA R package, then install a binary version with the command:
inla.binary.install()
Select CentOS 7 when prompted or Fedora |