Page Comparison

This page provides instructions for creating an Expense Report, to reconcile travel/non travel business-related expenses incurred during a business trip.

Table of Contents

Logging In

1. Navigate to any web browser.

2. Access Concur by logging in through our website at Travel Services and clicking “Login to Concur Travel & Expense.”

Creating an Expense Report

Expense reports can be created a couple ways:

• From an approved request in the Request Module, when Air, Car Rental, and/or Hotel applies, or

• Directly from the Expense Module.

Starting from an Approved Request

UConn related business travel, that includes Air, Car Rental, and/or Hotel, must have a Travel Request submitted and approved before the start of that trip.

...

10. Update any other header fields, as necessary.

11. Scroll to the bottom of the Report Header. The Claim Travel Allowance menu displays.

12. Click Yes, if lodging or meal expenses will be included in the expense report. The Travel Allowances window will display, skip ahead to the Travel Allowance Itineraries section of this training document.

13. Click Next.

Starting from the Expense Module

Business travel that does NOT include Air, Car Rental, and/or Hotel, does NOT require a pre-approved Concur request would be started from the Expense Module.

1. From the Concur homepage, click New | Start a Report. A new expense report displays.

2. Complete the required report header fields, identified with a red asterisk above each field.

3. If this Expense Report is being created in an Employee’s profile for charges incurred on behalf of the Guest to the Employee’s Travel Card select the Traveler Type of Guest and answer the question to state whether the preapproval was obtained through a Concur Travel request or if preapproval is maintained by the Department or is attached. Supporting documents can be attached to the expense report via the Manage Receipts drop-down menu.

4. If this Expense report is being created in an Employee’s profile for a Student’s Airfare or Hotel that has been charged to the Employee’s Travel Card, or a Car rental that was direct billed to UConn, the employee is required to choose the appropriate Traveler type for the Student.

5. Update any optional fields, as necessary.

6. Scroll to the bottom of the Report Header. The Claim Travel Allowance menu displays.

7. Click Yes, if lodging or meal expenses will be included with the expense report. The Travel Allowances window will display, skip ahead to the Travel Allowance Itineraries section of this training document.

8. Click Next.

Linking an Approved Request

To link a fully approved request to an existing expense report follow the steps below:

1. From the Open expense report click the Report Details drop-down arrow.

2. Click Manage Requests from the drop-down menu.

3. A pop up will appear with a list of your fully approved available requests. Click Add at the top left.

4. Under Available Requests click the checkbox beside the appropriate request and click Add to Report.

Travel Allowances | Itineraries

Travel allowances include Lodging and Meal Per Diems. Travelers may claim meal per diem, or individual actual meals, as permitted by their funding source. Refer to the UConn Travel Policy for additional details.

...

From the Open Expense Report Click the Travel Allowance drop-down arrow and select Manage Travel Allowance.

Available Itinerary

Use this option when a Travel Allowance Itinerary was previously created for the dates of the trip.

1. At the bottom of the Travel Allowances pop up under Available Itinerary click the drop-down arrow to select a viewing criteria.

2. Select the appropriate itinerary and then click Assign. The selected itinerary now displays within the Assigned Itineraries section.

3. Click Next>> at the bottom right. Skip ahead to the Expenses and Adjustments section of this training document.

Create Itinerary

Use this option if no previous Travel Allowance itinerary was created.

...

4. Click Save.

5. After completing the itinerary stops click Next>> at the bottom right and then click Next>> again.

Travel Allowances | Expenses & Adjustments

1. Click the checkboxes to indicate any meals that were provided during your trip, as necessary.

2. Click the Exclude | All checkbox if the Travel Card was used for individual actual meal expenses.

3. ALWAYS click the Use Percent Rule checkbox for each date of travel.

...

4. Click Create Expenses. If claiming Meal Per Diem, Daily Allowances will display as individual line items on the expense report.

5. To modify Meal Per Diem/Daily Allowance expense items from an open expense report, Click the Travel Allowance dropdown arrow and select Manage Travel Allowance and then click the Expenses & Adjustments tab.

Adding Expenses

When using the UConn Travel Card, transactions automatically feed into the travelers Available Expenses queue within the Expense module.

...

1. From the open expense report, click Add Expense.

2. Click Available Expenses. A list of Travel Card Expenses display. Travel card expenses are identified by an orange credit card icon.

3. From the Available Expenses menu, click the check box(es) for the appropriate expenses to be added to the current expense report.

4. Click Add to Report.

5. Click the checkbox beside the Travel Card transaction added to the expense report to verify or update the Expense Type is correct.

6. Complete all required fields marked with a red asterisk.

7. Complete optional fields, as necessary.

8. As necessary, click any of the following:

   1. Click Itemizations (to itemize the expense into multiple expense types).

   2. Click Allocate (to allocate the expense to one or more KFS accounts).

   3. Click Attach Receipt Image (to upload and attach receipt images).

   4. Attendees (to add the name of the individual who used the expense).

Adding Out-of-Pocket Expenses

Out of Pocket expenses must be added manually from within an open expense report.

1. From the open expense report, click Add Expense.

2. Click Create New Expense.

3. Select the appropriate expense type from the options available or type the expense type in the search field.

4. Complete all required fields marked with a red asterisk.

5. Complete optional fields, as necessary.

6. As necessary, click any of the following:

   1. Click Itemizations (to itemize the expense into multiple expense types).

   2. Click Allocate (to allocate the expense to one or more KFS accounts).

   3. Click Attach Receipt Image (to upload and attach receipt images).

   4. Attendees (to add the name of the individual who used the expense).

Itemizing Expenses

Hotel Lodging: Itemizing Nightly Lodging Expenses

A hotel bill typically contains a variety of expenses which may include nightly room charges, nightly room taxes, parking, meals, etc. You must itemize these expenses as they appear on the hotel folio to ensure your reimbursement is processed in a timely manner.

1. With the expense report open, select Hotel Lodging from the expense type listing.

2. Complete all required fields marked with a red asterisk.

3. Complete optional fields, as necessary.

4. Click the Itemizations tab, click Create Itemization.

5. Select the appropriate lodging expense type. You can then select if this entry type is a reoccurring or single itemization.

6. Select whether your hotel room rate was The Same Every Night, or Not the Same.

7. Enter the Room Rate (per night) and Room Tax (per night), as applicable.

8. Click Save Itemizations.

9. Click Save Expense. The word Itemized appears to the right of the expense under the Requested column.

Itemizing Hotel Deposits

Hotel deposits made prior to the hotel stay will be listed on the final itemized hotel folio. Each charge listed on the hotel folio must be itemized under a Hotel Lodging expense line item (e.g., nightly rate, taxes, hotel deposit (when applicable) parking, laundry, room service, etc.). Itemize the hotel deposit individually using the Hotel Lodging Deposit expense type, ensuring the amount is entered as a negative number (for example, if the deposit was $100, enter the amount as -100 in the hotel lodging deposit amount field).

Additional information is available in our Expensing a Hotel Deposit training document.

Itemizing partially Non-Reimbursable Expenses

Users can Itemize any expense that includes both business and personal expenses, or that is only partially funded, therefore requiring some out of pocket (Non-Reimbursable/Personal) contribution.

1. Create an expense line item as usual, then click the Itemizations Tab. You can also click to select an existing expense item from the list of transactions on the expense report then click Edit and then the Itemizations Tab.

2. Click Create Itemizations.

3. Select the Expense Type (Personal/Non-Reimbursable) that applies to the first itemization from the dropdown list. The page refreshes, displaying the required and optional fields for the selected expense type.

4. Complete all required fields marked with a red asterisk.

5. Click Save Itemization. The newly created itemization appears.

6. For each additional itemization, on the Itemizations tab, click Create Itemization, select the appropriate expense type and complete the appropriate fields. Once you have itemized the Remaining amount of the charge, an alert displays a green Success checkmark.

7. Click Save Expense. The word Itemized appears to the right of the expense under the Requested column.

Allocating Expenses

The Allocation feature allows you to allocate selected expenses to multiple KFS accounts.

Allocate a Single Expense

1. With the report open, click the checkbox beside an expense line.

2. Click Allocate.

3. You can allocate between multiple accounts and do so by percent or amount.

Allocate Multiple Expenses

1. With the report open, click the checkbox beside the appropriate expense lines.

2. Click Allocate. The Allocations for Report window appears.

3. Select Percent to allocate by percentage or Amount to allocate by actual dollar amount.

4. Click Add.

5. Add as many allocations as necessary, from the New Allocation or Favorite Allocations tabs.

6. Enter the KFS account in the Account number field.

7. Click Save. The word allocated appears to the right of the expense under the Requested column.

When allocating to UCPEA or AAUP award accounts follow the steps below

1. Click the checkbox next to the highest expense amount.

2. Click the Allocate button to select the accounts and the amount you would like to allocate to.

3. If one expense does not cover the award amount, go to the next highest expense amount and allocate off of that expense as well. Do this until you have allocated your award amount fully.

Adding Attendees

For business meals, airfare, hotel and certain other expense types, all attendees associated with the expense must be identified and listed. Users can add attendees and attendee groups to Concur in the Expense Profile Settings.

...

1. With the report open, from the expense screen click Attendees.

2. In the Attendees window Click View Attendees.

3. The Add Attendees Window appears.

4. Click Add. Attendees can be added in several ways:

   1. Recent Attendees – Select the check box next to the appropriate attendee.

   2. Attendee – Search for the guest or Faculty/Staff/Student. If you need to create a new attendee, click Create New Attendee, complete the required fields, and then click Create Attendee.

   3. Attendee Groups – Select from your Favorites or My Team (these are configured in your Profile settings based on Core-CT).

5. Click Save.

Entering Personal Car Mileage

Personal car mileage expenses should be submitted for use of a personal vehicle for business miles driven.

...

Refer to the Creating a Personal Car Mileage Expense Report document for additional details.

Foreign Currency Transactions

Transactions incurred during international travel should always be billed in the local currency to ensure the currency conversion within Concur is accurately calculated (including conversion rates, taxes, etc.).

For Travel card expenses:

Transactions billed in local currency (e.g., travel to Japan billed in YEN) will automatically convert to USD within Concur.

...

Out-of-Pocket Expense Incurred in Another Currency

1. With the report open, click Add, and then Create New Expense.

2. Search for or enter an expense type.

3. Enter the appropriate information in the required and optional fields (required fields are indicated with an asterisk). Note the following:

   1. Select the "spend" Currency from the list to the right of the Transaction Amount field. The Conversion Rate field appears.

   2. The Conversion Rate is automatically populated according to the Transaction Date and Currency entries. Expense calculates the Amount in your reimbursement currency.

   3. To switch between multiplication of the rate to division of the rate, click Reverse next to the Conversion Rate field. Currency can be converted by multiplying by a particular rate or dividing by a different rate.

4. Complete the remaining fields as appropriate, and then click Save Expense.

Receipts

Concur is configured to comply with the receipt requirements, as per the Travel and Expense policy. Receipts can be sent to your available receipt queue to be attached to an expense report at a later date, via email or through the Concur mobile app.

Required Receipts

Expense transactions that require receipts can be identified by the Receipt Required icon next to the item in the expense list.

Email Receipts

Before emailing receipts to the Available Receipts library, you must verify your email address in the Personal Information section of your Profile.

Profile SetUp | Email Verification

1. Click Profile > Profile Settings. The Profile Options page appears.

2. Click Personal Information from the left navigation pane. The Personal Information screen displays.

3. Scroll down to the Email Addresses section and click Add an Email Address.

4. Follow the below steps to verify your email address:

   1. Once you have saved an email address, click Verify.

   2. Check your email for a verification message from Concur.

   3. Copy the code from the email message into the Enter Code box next to the email address.

   4. Click OK to submit the code and complete verification.

5. Address your email to receipts@concur.com, attach a single receipt image, and send the email. This method sends an image of the receipt to the available receipts queue.

6. Alternatively, for automated expense itemization, address your email to receipts@expenseit.com, attach a single receipt image, and send the email. This method sends an image of the receipt, creates an expense line item for the transaction and itemizes the expenses on the receipt.

Allow your Delegate to Send Receipt Images to your Available Receipts Library

The Delegate may send receipts to receipts@concur.com or receipts@expenseit.com as long as both the User and Delegate have verified their email addresses within their own profile.

When emailing receipts on a delegate’s behalf, the delegate must replace the subject line with the User’s primary (verified) email address.

Upload Receipts from your Computer

Files saved to a folder on your computer may be uploaded directly into a user’s Available Receipts queue in Concur using the following steps.

1. Scan the documentation. Save to a folder on your computer.

2. Click Expense (from the top ribbon).

3. Scroll to the bottom of the Manage Expenses view.

4. Click Upload Receipt Image. The Receipt Upload window appears.

5. Locate the desired image(s), select, and click Open. The image(s) is Uploaded and available to be attached to an Expense report at any time.

Attach an Available Receipt to an Expense Entry

1. In the open expense report, click the Red Receipt icon on the expense entry line. From the Attach Receipt menu select Upload Receipt Images or select from the list of receipts previously uploaded to Concur.

2. A thumbnail image of the receipt will now appear. Click on the image to view a larger version of the receipt.

3. To detach a receipt from the expense line entry, click on the thumbnail image of the receipt and click Detach.

4. To add additional receipts to the same expense, click on the thumbnail image of the receipt and click Append.

Attaching Supporting Documents to the Report Header

Conference brochures, travel award letters and other supporting documentation are sometimes required to be attached to the header level of an expense report. Use the following steps to attach documents to the Expense Report Header.

1. From the open expense report click Manage Receipts.

2. Click Manage Attachments.

3. From the Attach receipt window click Upload Report Level Attachment.

4. Locate the desired image(s), select, and click Open.

Detaching Receipts from the Report Header

1. To detach all receipts from the report header, Click the Receipts drop down menu at the top of the expense report.

2. Click Delete receipt images. This will delete all documents attached to the report header. Documents cannot be deleted individually from the report header.

Missing Receipt Declaration

A Missing Receipt Declaration can be generated for a transaction missing a required receipt.

...

1. To attach a missing receipt affidavit, From the open expense report click Manage Receipts.

2. Click Missing Receipt Declaration. The Create Receipt Declaration pop-up displays.

3. Click the checkbox to select the applicable expense transaction.

4. Click Accept & Create.

Resolving Alerts

Audit rules are built into Concur, compliant with the travel policy and procedures, ensuring employees are in line with the travel policy and universities best practices. Alerts will display if a traveler violates any of the audit rules built into Concur. Yellow warnings are “soft” stops and designed to warn the traveler. Yellow warnings do not prevent a traveler from submitting for approval. Red warnings are “hard” stops. The red warnings must be resolved before submitting for approval.

Alerts display at the top of the open request and/or expense report page.

Copying an Expense

Recurring business expenses can be copied from a previous expense and then updated for the new expense item.

...

6. Once updated, click Save Expense.

Fraudulent Charges

Travel card charges identified as fraudulent must be rectified by the cardholder. Fraudulent charges should be submitted with the travelers next expense report, netting out the fraudulent charge with the respective credited item. If fraudulent charges exist, but there is no travel expected (therefore no expense report in the near future) – contact travel@uconn.edu.

1. Add fraudulent charge.

2. Add credit for fraudulent charge.

Submitting your Report

1. On the expense report page, click Submit Report.

2. Scroll through and read to the end of the Attestation.

3. Click Accept & Submit. The Report Totals window displays.

4. Review the information for accuracy, and then click Submit Report. The Report Status window appears.

5. Click Close.

Correcting and Resubmitting an Expense Report

If an expense report is returned to you by an approver, you will need to correct and resubmit the report for approval and reimbursement. The approver will include a comment explaining why the report was returned.

...

2. Click the Returned tile to view the returned report.

3. Review the approver's comment appears below the amount.

4. Comments can also be reviewed in the expense report by clicking the checkbox beside the expense line item and clicking Edit, then reviewing the comments field.

5. Make the requested changes, and then click Submit Report.

Additional Support

For help with Concur, contact travel@uconn.edu.

For additional reference material, refer to the Training and Resources page located on the Travel Services page.

Related Articles

...