Table of Contents

Description

...

Requires kerberos ticket (or shared key)

then create tunnel

MAC

...

Terminal Method:

• (one time, make sure that ssh_config is configured for kerberos)
• Get a kerberos ticket by either using the terminal  or the ticket viewer GUI
• If you want to connect to pre-production databases (DEV, TST, SUP) type:
  
  • ssh -fNL 1521:dbserver02.uits.uconn.edu:1521 <yournetid>@gateway.uits.uconn.edu
• or if you want to connect to production databases (PRD, UAT) type:
  • ssh -fNL 1521:dbserver01.uits.uconn.edu:1521 <yournetid>@gateway.uits.uconn.edu

FUGU method

• (one time, make sure that ssh_config is configured for kerberos)
• Get a kerberos ticket by either using the terminal  or the ticket viewer GUI
• Open Fugu
• select the ssh menue, and click "New SSH Tunnel"
• Fill in the following menue as follows:
  
  • Create Tunnel to: dbserver02.uits.uconn.edu (if Test database) or dbserver01.uits.uconn.edu (if Production database)
  • Service or Port: 1521
  • Local Port: 1521
  • Tunnel Host: gateway.uits.uconn.edu
  • Username: <your netid>
• click the 'start tunnel' button

Enable kerberos ssh

• Open terminal:
• Either:
  
  • sudo vi /etc/ssh_config
    or
  • sudo nano /etc/ssh_config
• make the line that looks like this:
  
  • # GSSAPIAuthentication no
    looks like this:
  • GSSAPIAuthentication yes
• then save the file.

Getting a Kerberos Ticket through the ticket viewer

• open the ticket viewer gui:
  
  • it may be located in 
    
    • /System/Library/CoreServices
      or
    • Applications/Utilities/
• click the 'Add Identity' button
• In the menue that appears fill out:
  • Identity: <your netid>@UCONN.EDU
  • Password: <your netid password>

Getting a Kerberos Ticket through the terminal

• Open a terminal
• type:
  
  • kinit <your netid>@UCONN.EDU
• type your password and hit enter
  
  

Windows

...

Network Identity Manager / Putty Method:

• Download and install Putty from Centrify website.http://www.centrify.com/resources/putty.asp
• Download and install the latest MIT kerberos.
• Configure user account in Kerberos and create a ticket.
• Follow the instructions on the Centrify help document to configure Putty - Document is part of the downlaod package.
• Start the Putty session from Start up -> Centrify -> Putty
• type 'gateway.uits.uconn.edu' into the hostname field
• select the Connection -> SSH -> Kerberos from the categories on the left hand side and enable "Attempt Kerberos Auth"
• Enter <netid>@UCONN.EDU Service Principal Name section.
• Under Auto-Login, select third radio - User name portion of user principal name
• <SET UP THE TUNNEL>
• Select the Sessions category from the left hand side
• Type a meaningful name such as 'gateway server' into the saved sessions text field
• click the save button

SSH shared keys / Putty Method:

http://www.howtoforge.com/ssh_key_based_logins_putty

...

• Download Putty: http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe and save it to somewhere where you can access it
• Download PuttyGen: http://the.earth.li/~sgtatham/putty/latest/x86/puttygen.exe and save it to somewhere you can access it
• Run PuttyGen.exe
• click the 'Generate' button
• move the mouse around in the window until the progress bar is complete (puttygen uses this to make the key random, this isn't a joke)
• click the 'Save public key' button, and ignore the warning about the keyphrase (what do we click to ignore it?) save the file somewhere handy, name it 'public'
• click the 'Save private key' button, save the file in the same location as the private key, name it 'private'
• Send an email to Mitch and Jim with the subject 'putty public key' and attach the 'public' file that we saved two steps prior
• close 'PuttyGen.exe'
• open 'Putty.exe'
• type 'gateway.uits.uconn.edu' into the hostname field
• select the SSH -> Data from the categories on the left hand side 
• type your netid (is this true for the gateway server?) into the 'Auto login user' field
• select SSH -> Auth from the categories on the left hand side
• click the 'Browse' button to the right of the 'Private key file for authentication' field
• Select the file named private that was saved in one of the previous steps
• <SET UP THE TUNNEL>
• Select the Sessions category from the left hand side
• Type a meaningful name such as 'gateway server' into the saved sessions text field
• click the save button

<SET UP THE TUNNEL> Putty

• in putty select tunnel from the category list from the left hand side "Connection -> SSH -> Tunnels"
• In source port type 1521
• in Destination type:
  
  • dbserver02.uits.uconn.edu:1521      (For non-production)
  • dbserver01.uits.uconn.edu:1521      (For production)
• click the 'add' button

Usernames and passwords

For usernames and passwords please contact james.gedarovich@uconn.edu

Environment Connection Parameters