...
There is a power button on the bottom side of the frame in the bottom right-hand corner of the monitor.
...
Choose your input:
...
Tap on the triple-dots at the bottom of the monitor screen.
...
Next tap on the input button:
...
If you have a desktop computer attached to the back of the monitor, or another HDMI device, choose HDMI.
If you wish to plug in your laptop using the USB-C, choose USB-C as the input.
Lower the image
This monitor has dedicated buttons that allow you to lower the image and help you annotate on the top portion of the screen.
Tap on the double-dots on either side of the screen to drop the image down.
...
Instruction Printout:
...
More Information: What is this monitor? How does it work?
This display is a large monitor for your computer.
There may be a computer installed between the monitor and the wall.
This display is not a TV and cannot accept a television signal.
Due to this fact, this guide will call this display a monitor.
This monitor has HDMI inputs and one USB-C input.
This monitor acts as a USB Hub.
Can send peripheral devices to multiple host devices.
How does this monitor handle USB?
The USB-C input
Looking at the back of the monitor, you will see a standard USB-C port with a DP, or “DisplayPort”, label. This cable carries both your video and the connection to the optional USB devices (camera, mouse, keyboard, etc.)
USB Hub
| Tip |
|---|
A “hub” combines many inputs and sends them to one output. The presence of this USB Hub built into the monitor allows you to use your USB devices with whichever device you are viewing on the screen. |
...
You will also see three USB-B ports above the USB-A ports. These B ports act as “downlinks” to the host devices. You will plug your computer and laptop into these downlink ports. Each downlink (USB-B) is associated with the HDMI port closest to it. Therefore, one you are using Input 1 on the monitor, the monitor will send all the peripheral devices out the top downlink port. When you are viewing input two, your peripherals will be sent out the USB-B port second from the top. The third, fourth, and full-size DisplayPort connector all share the third USB downlink. Please click on the diagram below for more information.
...
Ellipses on Sides and Bottom of Screen
Side Ellipses: Drop Down
Clicking the two dots on either side of the monitor will drop the screen down 1/3 of the way down. This makes the content at the top better accessible to reach. While the screen is dropped down however, you will not be able to access the bottom 1/3 of the screen as it will not be shown. Clicking the two dots again will revert the screen back to the original size.
...
Change the color temperate
Change the input
Access the OSD menu
Close the Control Launcher
...
buttons on side drop down screen
bottom ellipsis brings up menu: change input, color temperate
blank screen, freeze image, drop half way, color temp, change input, menu, close