Page Comparison

...

After your TV is set up, you can scan for available channels.

1. Connect the coaxial cable to the HuskyVision faceplate (the faceplate with only one coaxial connection) and the input jack on your cable-ready TV or DVD/media device. If a DVD/media device is being used, connect a second coaxial cable from the DVD/media device to your TV.

2. Check to make sure the TV and/or DVD/media device is set to the appropriate mode(s) to receive cable. For most TVs, you can set the mode to either Cable or TV. 

3. Auto-program your TV and/or DVD/media device for the available HuskyVision channels. 

   1. Enter the on-screen menu for the TV and/or DVD/media device by selecting Setup or Menu on the device’s remote control or the device itself.

   2. Navigate to and run your TV's Auto-program/Channel Search feature.

Your TV and/or DVD/media device should now be able to receive cable.  

...