In order to connect an Internet of Things (IoT) device to the UConn network, you will be asked to register your device by providing the device's MAC address. Every network-connected device has an IP address and a unique MAC address that identifies it on the network. This article covers how to find the MAC address on devices commonly registered with ITS.
| Expand |
|---|
|
| Expand |
|---|
| - At the home menu, go left to select Settings, then choose Network Settings
- Select Settings and Connection Status List
- Scroll to the bottom area to find the MAC Address.
|
| Expand |
|---|
| - Select Settings on the home screen
- Scroll down to System
- Select System Information
- The wired and wireless MAC Address are listed at the bottom of the screen.
|
| Expand |
|---|
| - Go to the home screen.
- Choose System Settings to the far right in the home screen.
- Choose Network Settings
- Select Wireless Network
- Select Configure Network
- Select Additional Settings
- Select Advanced Settings
- The Wireless MAC address should be listed on the middle area.
|
| Expand |
|---|
| - Press the Xbox button on the controller to open the guide.
- Select System > Settings > General > Network settings.
- Choose Advanced Settings
- At the bottom of this screen you'll see a headings for wired MAC and wireless MAC addresses.
- For connecting to the UCONN-GUEST network, please give the wireless MAC address to the ITS Tech Support Center.
|
| Expand |
|---|
| - Select System Settings from the home screen
- Select Internet
- Your System MAC Address should be displayed on this screen
- If the System MAC Address is not displayed on this screen, select Internet Settings
- Scroll to the bottom and note the System MAC Address
|
|
...